数字化工程环境下复杂产品技术状态管理架构优化

doi:10.12305/j.issn.1001-506X.2023.11.24

摘要/Abstract

摘要：

复杂产品研制生产是不断迭代且数据庞大的系统工程, 而技术状态管理则是复杂产品设计研制的关键因素之一。以复杂产品为研究对象, 梳理了传统技术状态管理体系架构的现状与特点。在此基础上, 针对基于数字化环境的特点, 构建了复杂产品管理以及技术状态管理的总体框架, 并对技术状态管理中的分项目实施路径进行了详细说明, 为数字化工程环境下复杂产品技术状态管理的进一步发展与优化提供了思路与参考。

关键词: 数字化, 复杂产品, 技术状态管理, 体系架构

Abstract:

The development and production of complex products is a continuous iterative and data intensive system engineering, and technical state management is one of the key factors in the design and development of complex products. Taking complex products as the research target, we summarize the current status and characteristics of traditional technology status management system architecture. On this basis, in response to the characteristics of the digital environment, an overall framework for complex product management and technical status management is constructed, and the implementation paths of sub projects in technical status management are detailed, which provides ideas and references for the further development and optimization of complex product technical status management in the digital engineering environment.

Key words: digitalization, complex product, technical state management, system architecture

中图分类号:

TB497

任璐英, 王庆国, 张海峰, 丁洁, 徐卫卫, 臧雪静. 数字化工程环境下复杂产品技术状态管理架构优化[J]. 系统工程与电子技术, 2023, 45(11): 3573-3578.

Luying REN, Qingguo WANG, Haifeng ZHANG, Jie DING, Weiwei XU, Xuejing ZANG. Optimization of complex product technical state management architecture in digital engineering environment[J]. Systems Engineering and Electronics, 2023, 45(11): 3573-3578.

图/表 7

图1

图2

图3

图4

图5

图6

图7

参考文献 29

1	胡云, 米凯. 数字化环境下航天产品技术状态管理标准体系研究[C]//第十一届中国标准化论坛论文集, 2014: 1240-1243.
	HU Y, MI K. Research on the technical state management standard system for aerospace products in a digital environment[C]//Proc. of the 11th China Standardization Forum, 2014: 1240-1243.
2	秦剑, 梅文辉. 数字化环境下的复杂装备质量管控体系架构研究[J]. 价值工程, 2019, 38 (24): 250- 256. doi: 10.14018/j.cnki.cn13-1085/n.2019.24.104
	QIN J , MEI W H . Research on the architecture of complex equipment quality control system in a digital environment[J]. Value Engineering, 2019, 38 (24): 250- 256. doi: 10.14018/j.cnki.cn13-1085/n.2019.24.104
3	任璐英, 王庆国, 马倩, 等. 基于元模型的复杂产品虚拟样机建模方法研究[J]. 系统工程与电子技术, 2022, 44 (5): 1609- 1614.
	REN L Y , WANG Q G , MA Q , et al. Modeling method study for virtual prototyping of complex products based on meta model[J]. Systems Engineering and Electronics, 2022, 44 (5): 1609- 1614.
4	范文慧, 肖田元. 复杂产品协同设计、仿真、优化一体化平台[J]. 科技导报, 2007, 25 (4): 15- 24.
	FAN W H , XIAO T Y . Collaboration integrated platform of design, simulation and optimization for complex products[J]. Science and Technology Guide, 2007, 25 (4): 15- 24.
5	FISCHER P M , LUDTKE D , LANGE C , et al. Implementing model-based system engineering for the whole lifecycle of a spacecraft[J]. CEAS Space Journal, 2017, 9 (3): 351- 365. doi: 10.1007/s12567-017-0166-4
6	陈明晖, 彭战武, 赵兴国, 等. 面向研制单位的型号研制技术状态管理方法及其标准化研究[J]. 新技术新工艺, 2019, 39 (11): 69- 75.
	CHEN M H , PENG Z W , ZHAO X G , et al. Model development technology state management method and its standardization, research for development units[J]. New Technologies and Processes, 2019, 39 (11): 69- 75.
7	宋铭涛. 面向数字化车间设备状态的监控技术研究与实现[D]. 沈阳: 沈阳计算技术研究所, 2019.
	SONG M T. Research and implementation of monitoring technology for the status of digital workshop equipment[D]. Shen-yang: Shenyang Institute of Computing Technology, 2019.
8	MONTICOLO D , BADIN J , GOMES S , et al. A meta-model for knowledge configuration management to support collaborative engineering[J]. Computers in Industry, 2015, 66 (8): 11- 22.
9	WANG X Q , LIU M Z , GE M G , et al. Research on assembly quality adaptive control system for complex mechanical products assembly process under uncertainty[J]. Computers in Industry, 2015, 74 (9): 43- 57.
10	陈明晖, 李伟, 赵兴国, 等. 数字化设计环境下型号研制技术状态管理的几点思路和做法[J]. 质量与可靠性, 2017, 33 (2): 1- 6.
	CHEN M H , LI W , ZHAO X G , et al. Some ideas and practices of model development configuration management in the digital design environment[J]. Quality and Reliability, 2017, 33 (2): 1- 6.
11	陈畅宇, 贺文兴, 易旺民, 等. 航天器总装技术状态的数字化管理方法[J]. 航空学报, 2018, 39 (S1): 722206.
	CHEN C Y , HE W X , YI W M , et al. Ddigital configuration management method for space craft assembly[J]. Acta Aeronautica et Astronautica Sinica, 2018, 39 (S1): 722206.
12	李晓曦, 张立新, 郭科志, 等. 基于系统工程的新一代军机技术状态更改管理[C]//第五届中国航空科学技术大会论文集, 2021: 580-585.
	LI X X, ZHANG L X, GUO K Z, et al. New generation military aircraft configuration change management based on SE[C]//Proc. of the 5th China Aviation Science and Technology Confe-rence, 2021: 580-585.
13	张小达, 冯铁惠, 吴永亮. 技术状态管理研究[J]. 航天标准化, 2013, 24 (4): 5- 9.
	ZHANG X D , FANG T H , WU Y L . Research on technology state management[J]. Aerospace Standardization, 2013, 24 (4): 5- 9.
14	刘可, 任朴林, 王晔. 科研生产交叉条件下如何做好技术状态管理工作[J]. 航空标准化与质量, 2020, 48 (5): 24- 27.
	LIU K , REN P L , WANG Y . How to do a good job in the management of technical status under the intersection of scientific research and production[J]. Aviation Standardization and Quality, 2020, 48 (5): 24- 27.
15	陈明丽, 高德记. 技术状态管理的认识与实践[J]. 航空标准化与质量, 2004, 33 (3): 27- 30.
	CHEN M L , GAO D J . Understanding and practice of technical state management[J]. Aviation Standardization and Quality, 2004, 33 (3): 27- 30.
16	张志珍. 技术状态管理实施指南[M]. 北京: 中国计量出版社, 1998.
	ZHANG Z Z . Technical status management implementation guide[M]. Beijing: China Metrology Press, 1998.
17	王巍, 代为群. 技术状态管理[J]. 飞机设计, 2010, 30 (6): 43- 45.
	WANG W , DAI W Q . Technical State Management[J]. Aircraft Design, 2010, 30 (6): 43- 45.
18	温岚, 杨威, 赵宁. 航天器技术状态基线与技术状态文件的应用探讨[J]. 航天器工程, 2015, 24 (1): 133- 139.
	WEN L , YANG W , ZHAO N . Discussion on the application of spacecraft technical state baseline and technical state documents[J]. Spacecraft Engineering, 2015, 24 (1): 133- 139.
19	GERRISEN B , GIELINGH W . Current state and future of product data technologies[J]. Computer-aided Design, 2008, 40 (7): 735- 755.
20	韩志忠, 胡秦赣, 吕保良. 产品数字化定义中的技术状态标识[J]. 航空标准化与质量, 2008, 37 (5): 38- 40.
	HAN Z Z , HU Q G , LYU B L . Technical status identification in the digital definition of products[J]. Aviation Standardization and Quality, 2008, 37 (5): 38- 40.
21	BOHM M R , STONE R B , SZYKMAN S . Enhancing virtual product representations for advanced design repository systems[J]. Computing and Information Science in Engineering, 2005, 5 (4): 360- 372.
22	赵寒, 张荣霞. 模型驱动的航天型号技术状态管理方法研究[J]. 航天制造技术, 2013, 31 (4): 4- 8.
	ZHAO H , ZHANG R X . Research on model-driven aerospace configuration management method[J]. Space Manufacturing Technology, 2013, 31 (4): 4- 8.
23	ALTSHULLER G S . Creativity as an exact science: the theory of the solution of inventive problems[J]. Journal of Development Economics, Gordon and Breach, 1984, 91 (1): 64- 76.
24	郭鑫, 安洪振, 朱剑伟, 等. 技术状态管理方法在核电厂设计过程中的应用研究[J]. 核安全, 2020, 19 (4): 26- 30.
	GUO X , AN H Z , ZHU J W , et al. Research on the application of technical condition management method in the design process of nuclear power plants[J]. Nuclear Safety, 2020, 19 (4): 26- 30.
25	孙维有. 技术状态管理在轨道交通车辆全生命周期中的应用[J]. 城市轨道交通研究, 2017, 20 (2): 117- 120.
	SUN W Y . Application of technical condition management in the whole life cycle of rail transit vehicles[J]. Urban Rail Transit Research, 2017, 20 (2): 117- 120.
26	丁华, 刘方超, 李昆. 浅谈机载设备技术状态管理方案[C]//中国航空学会管理科学分会学术交流会, 2015: 107-111.
	DING H, LIU F C, LI K. Talking about the technical state management scheme of airborne equipment[C]//Proc. of the Academic Exchange Meeting of Management Science Branch of China Aviation Society, 2015: 107-111.
27	李成, 高建民, 李青. 基于过程控制的设计更改控制系统研究[J]. 计算机集成制造系统, 2006, 12 (10): 1549- 1555.
	LI C , GAO J M , LI Q . Research on design change control system based on process control[J]. Computer Integrated Manufacturing System, 2006, 12 (10): 1549- 1555.
28	XUE H F , ZHENG X H . Independently developed systems engineering of China's aerospace industry[J]. INCOSE International Symposium, 2016, 26 (1): 1388- 1398.
29	WAN B L, CHEN C Y, HE W X, et al. Research of the technology and application of spacecraft assembly data-package construction based on MBD[J]//Proc. of the MATEC Web of Conferences, 2016, 44(5): 01040.

[1]	彭祺擘, 张海联. 基于模型的载人航天工程需求分析方法[J]. 系统工程与电子技术, 2023, 45(11): 3532-3543.
[2]	任璐英, 王庆国, 马倩, 张海峰, 徐卫卫. 基于元模型的复杂产品虚拟样机建模方法研究[J]. 系统工程与电子技术, 2022, 44(5): 1609-1614.
[3]	王姝婷, 刘晓冰, 周军华, 白朝阳, 翟翔. 基于本体的复杂产品维修工程案例知识表示及重用方法[J]. 系统工程与电子技术, 2022, 44(2): 557-568.
[4]	范秋岑, 毕文豪, 张安, 王文浩. 民用飞机高度控制系统MBSE建模方法[J]. 系统工程与电子技术, 2022, 44(1): 164-171.
[5]	袁刘鹏程, 方哲梅, 王剑波, 秦肖臻. 基于CRC-MATE的体系架构方案选择[J]. 系统工程与电子技术, 2021, 43(8): 2146-2153.
[6]	王雨农, 毕文豪, 张安, 詹超. 基于DoDAF的民机MBSE研制方法[J]. 系统工程与电子技术, 2021, 43(12): 3579-3585.
[7]	潘星, 张振宇, 张曼丽, 张国忠. 基于SoSE的装备体系RMS论证方法研究[J]. 系统工程与电子技术, 2019, 41(8): 1771-1779.
[8]	李岸达, 何桢, 何曙光. 基于GSA的复杂产品关键质量特性识别[J]. 系统工程与电子技术, 2015, 37(9): 2073-2079.
[9]	吴宝林１，２，田也壮１. 航天复杂产品系统智能优化协调方法及其应用[J]. 系统工程与电子技术, 2013, 35(11): 2342-2346.
[10]	徐飞，刘明雍，李闻白，雷小康. 参数不确定性系统的鲁棒控制器数字化再设计研究[J]. Journal of Systems Engineering and Electronics, 2013, 35(1): 156-160.
[11]	丁孝永, 冯克明. 高精度幅相差的数字化测量方法[J]. Journal of Systems Engineering and Electronics, 2012, 34(7): 1334-1338.
[12]	李洪波, 徐哲. 考虑活动随机重叠和资源冲突的复杂产品开发流程仿真建模[J]. Journal of Systems Engineering and Electronics, 2012, 34(7): 1412-1418.
[13]	刘远, Hipel Keith W, 方志耕, 袁文峰. 复杂产品外购系统关键特性的质量事前控制策略[J]. Journal of Systems Engineering and Electronics, 2012, 34(11): 2297-2305.
[14]	吴延勋，秦现生，张海峰. 基于模糊神经网络的复杂产品研发决策评估[J]. Journal of Systems Engineering and Electronics, 2011, 33(7): 1575-1579.
[15]	丁孝永, 黄培康, 冯克明. 相控阵雷达宽带宽扫描角数字化解决方案[J]. Journal of Systems Engineering and Electronics, 2010, 32(8): 1608-1612.